How to Maintenance and maintenance guide of our vacuum homogenizer emulsifier

1. The control table should be dry, do not accumulate water, so as not to slip

2. Keep the machine surface clean, smooth and without watermarking.

3. Keep the interior clean, clean with hot water as soon as possible after each batch of production;

4. When opening the vacuum pump, all valves on the sealing head are closed except the vacuum valve.

5. Often check whether the water in the circulating water tank of the vacuum pump is sufficient, otherwise, when the water in the vacuum is exhausted, the vacuum pump will be damaged.

6. Check and check the mixing blades of the main pot, water tank and fuel tank to ensure that the screws are loose.

7. Check the emulsifier blades frequently to ensure the tightening;

9.Check regularly whether the water pipe is unblocked and whether the solenoid valve works normally.

10. Check the hydraulic oil frequently to ensure that its liquid level is at the highest point.

11. Check regularly whether the grease of the internal and external mixing reducer is sufficient.

12. During the use of the equipment, some accessories (safety valve) must be regularly sent to the relevant departments to adjust all the working pressure of the safety valve to ensure the safety of the equipment;

13. Monthly add molybdenum disulfide lubricating oil to maintain the frame wall mixer.

(Open the stainless steel lid on the main pan when added)

14. Keep the heating solenoid valve cool and dry; avoid dampness when cleaning the equipment;