What are the maintenance methods of vacuum emulsifier?
author: SIPUXIN
2024-05-09
1. After the emulsification is over, the emulsifier needs to be cleaned to maintain the work efficiency of the fixed rotor and
keep the emulsion seal. If necessary, design a cleaning cycle nearby.
2. After the vacuum emulsifier is confirmed to be connected, the motor is activated, and the motor is required to repeat
2. After the vacuum emulsifier is confirmed to be connected, the motor is activated, and the motor is required to repeat
the direction of the motor and the main axis direction.
3. If there is a liquid leakage at the axis during operation, the pressure of the machine should be adjusted after stopping.
3. If there is a liquid leakage at the axis during operation, the pressure of the machine should be adjusted after stopping.
4. Depending on the medium used, regularly clean and export filters are cleaned to avoid reduced feed volume and
affect consumption efficiency. The materials entering the studio are fluids, and dry powder materials and lump materials
are not allowed to enter the machine directly, otherwise the beds will be formed to damage the emulsion machine.
5. It is strictly forbidden to enter the emulsifier studio in metal dandruff or hard non -fragile debris to avoid destructive damage
to the work stator, rotor and equipment.
6. Before making this high -cut emulsion machine, formulate corresponding safety consumption operating procedures to ensure the
6. Before making this high -cut emulsion machine, formulate corresponding safety consumption operating procedures to ensure the
safety of operators and equipment. Users should set up a safety maintenance system in the electrical control system and have good
and reliable electrical and motor grounding devices.
7. The fixed and rotor of a vacuum emulsifier should be checked regularly. If you find excessive wear, replace the
corresponding parts in time to ensure the effect of decentralized emulsification.
8. When using an emulsifier, input the liquid material continuously or maintain a certain amount in the container.
8. When using an emulsifier, input the liquid material continuously or maintain a certain amount in the container.
To prevent the machine from being empty, it is necessary to damage the equipment due to high temperature or material crystallization solidification.
9. In the process of running the high -cutting emulsion, if there are abnormal or other problems, parking should
9. In the process of running the high -cutting emulsion, if there are abnormal or other problems, parking should
be parked immediately to exclude the failure before running. After stopping, clean the studio, fixed, and rotor for cleaning.
20KL soap solution mixing tank with 5KL buffer shampoo tank
Related Article
fully automatic chuck‑type vial filling machine integrates bottle feeding.
SIPUXIN Fully Automatic Chuck‑Type Vial Filling Machine
The quality of cosmetic creams and foundations largely depends on emulsification and dispersion performance. This 200L mobile electric‑heating vacuum homogenizing emulsifier from SIPUXIN integrates stirring, high‑speed dispersion, high‑shear homogenization, electric temperature control and vacuum defoaming in one unit. It is an ideal core equipment for medium‑scale cosmetic factories to produce foundation, face cream, BB cream, gel and other personal‑care products.
200L Mobile Electric Heating Vacuum Homogenizing Emulsifier with Dispersing Disc
